For People Who Love The Jersey Shore!

jersey shore blog

move fast, you can use free-roam settings for hide and seek and other movement-based play. While the Ro boraptor performs movements on its own; use the controller provided to make it perform a variety of func tions such as silly dances, chase family members and pets or anything else you can think of. Mini-Raptor There is a second type of Roboraptor available on the market today. Sadly, it does not possess either m Eat to Live ood modes or much in the way of playing ability. The "mini-raptor" does not include a controller. It is a battery-operated toy that can limp along in a humorous fashion, but lacks most of the features the lar jersey shore blog ger model enjoys. While it may be fun to walk the raptor off of or into objects, it does not have many f .

h of the nut. It will be a whole number, and you will need the corresponding size die. 2 Secure the nut in the vise with the threaded part facing up. 3 Attach the die to the tap wrench by loosening the small screws holding it in place with the small allen key included in the set. 4 Place the tap wrench on top o f the nut thread, at a right angle. This is very important to make sure the thread is remade properly. 5 typolight templates free Apply a little lubricating oil to the nut and tap wrench. You will need to do this periodically during the process. 6 Turn the tap wrench clockwise for one complete rotation, then turn it counterclockwise fo jersey shore blog r a quarter turn. This will ensure that the die creates an even thread and breaks off any metal fragment .

bottom of the thread to remove any remaining metal fragments. 8 Remove the nut from the vise and replac e it where it came from.1 Cut off one end of the corn cob with the pocket knife, about 2 or 2-1/2 long. You can cut from either the bottom or the top, one giving more of a cylinder shape to the bowl, the othe r more of a cone. 2 Bake the cut bowl for 3 hours on 100 degrees, then allow it to dry out for about a w fax cover sheet free eek on a window sill. 3 Dig out the pith in the center of the cob, using a pocket knife, until you can f it the top of your thumb into it up to the knuckle. Drill a slender hole into the remaining pith at the jersey shore blog bottom. 4 Cut the wild rice stalk at an angle at one end, to about 6 inches. Hollow it out by drilling a .


jersey shore blogs | jersey shore blog | jersey shore bikes | jersey shore fan club

Nav links



Developed by Shore Advantage • a division of NJ MetroNET, Inc.
Copyright ©1997-2006 • REVISED: January 28, 2006